Tekuest
BatSimator
IoT Battery Life Modelling Tool — tekuest.co.uk
BatSimator
IoT Battery Life Modelling Tool by Tekuest
Save PDF
Please correct the highlighted fields before results can be calculated.
Battery
Must be > 0
Must be 1–100
Must be 1–100
Radio
Typical LoRaWAN: adaptable to other duty-cycled radios
Must be ≥ 0
Must be ≥ 1
SF12, 51 byte payload  ·  TX
Must be ≥ 0
Must be ≥ 0
RX
Must be ≥ 0
Must be ≥ 0
Radio avg
Other hardware
Must be ≥ 0
Other HW avg
Sensor
Must be ≥ 0
Must be ≥ 1
Sampling
Must be ≥ 0
Must be ≥ 0
Sensor avg
MCU
Active time derived from RADIO and SENSOR
Must be ≥ 0
Must be ≥ 0
Derived active time / day
Radio TX/RX × uplinks/day
Sensor sampling × samples/day
Total active
MCU avg
Modelled Runtime
Current budget
Rated capacity
Effective capacity
Total average current
Years
Months
Weeks
Days
Battery life sensitivity to Uplinks

Disclaimer: BatSimator provides battery life estimates for indicative purposes only. Results are based on parameters entered and idealised modelling assumptions. Actual battery life will vary depending on operating conditions, temperature, battery chemistry, firmware behaviour and other factors. Tekuest Limited accepts no liability for decisions made based on these estimates. Always validate with physical measurements on your target hardware.

Disclaimer: BatSimator provides battery life estimates for indicative purposes only. Results are based on parameters entered and idealised modelling assumptions. Actual battery life will vary depending on operating conditions, temperature, battery chemistry, firmware behaviour and other factors. Tekuest Limited accepts no liability for decisions made based on these estimates. Always validate with physical measurements on your target hardware.